Shaver And Rf Console Integration - Stryker CrossFlow Quick Start Manual

7

Shaver and RF console integration

How to access and adjust approved resection console integration settings.
Step 1: Access settings menu
= Pump customization menu
Step 2: Access shaver and RF
sub-menu
8
Refer to the instructions for use for important safety and user advice. Do not operate the device without first reading and understanding the Instructions for Use.
Step 3: Customize shaver
= Shaver and RF
sub-menu
= Shaver console settings
= When using CrossFire
consoles
= When using CORE
consoles
= When using an approved
shaver console
= When no shaver console is
connected
= Suction up
= Suction down
Step 4: Customize RF
NOTE: While in "Other", suction must be checked
if using RF devices with suction. Uncheck if using
RF without suction.
= RF console settings
NOTE: Adjust Activation Threshold to optimize
pump response to other RF or Shaver consoles.
Press
= When using CrossFire consoles
= When using an approved RF
console
= When no RF console is
connected
Step 5: Return to run screen
Integration of shaver
= Exit menu
and/or RF devices are
now customized