Save Surgeon Profile Settings - Stryker CrossFlow Quick Start Manual

10

Save surgeon profile settings

How to save the current CrossFlow settings to the custom surgeon profile.
Step 1: Access settings menu
= Pump customization menu
The IFU part number is: P17330. The CrossFlow Pump catalog number is: 0450000000
Step 2: Save settings to
surgeon profile
= Save profile sub-menu
Press:
= Save current settings to
custom surgeon profile
NOTE: The settings of the default dynamic profile
cannot be saved over.
Step 3: Return to run screen
Return to run screen
= Exit menu
The updated settings are now saved to the Custom
Surgeon Profile
11