Wash Function - Stryker CrossFlow Quick Start Manual

5

Wash function

How to access and adjust the wash function.
Step 1: Access settings menu
= Pump customization menu
Understanding wash
Wash function
The wash function allows for a customized, quick increase in pressure and flow to
clear debris, control bleeding and improve visualization in the joint. Can customize
to last for a duration up to 120 seconds.
6
Refer to the instructions for use for important safety and user advice. Do not operate the device without first reading and understanding the Instructions for Use.
Step 2: Adjust wash settings
= Wash settings sub-menu
= Increase pressure/flow/duration settings
= Decrease pressure/flow/duration settings
= Exit settings menu
EXAMPLE: 50% Pressure increase of 50 mmHg
set pressure would become 75mmHg during
wash cycle.
Step 3: Start pump to perform
wash
= Wash function active
= Wash function inactive