RED Scarlet Workflow Manual page 8

Hide thumbs Also See for Scarlet:

Table of Contents

NOTE: When you're in preview mode, you will not see frame summing take effect. Once you start

recording, you will be able to see the brightened image. You may have to experiment with your exposure

and frame summing settings before you achieve the brightness and effect you want.

FRAME AVERAGING

The Frame Averaging setting takes the number of specified frames, combines them into 1 frame, and

averages the exposure time for each of the original frames. You can use frame averaging to achieve the

effect of long-exposure along with the benefits of reduced noise. However, frame averaging does affect

motion blur characteristics.

For example, if you select 16 as your FRAMES TO PROCESS value, and set your exposure to 1/48 sec,

your resulting image will still have the exposure value of 1/48 sec along with the effect of long-exposure.

NOTE: When you're in preview mode, you will not see frame averaging take effect. Once you start

recording, you will be able to see the altered image. You may have to experiment with your exposure and

frame averaging settings before you achieve the effect you want.

Table of Contents

Need help?

Do you have a question about the Scarlet and is the answer not in the manual?