Connecting The Power Supply - RADEMACHER HomePilot Translation Of The Commissioning Instruction Manual

i
EN

8.2 Connecting the power supply

Connect the power supply provided to the power input
[ DC 5 V/3 A ] of the HomePilot® and then plug the power sup-
ply into a free 230 V / 50 Hz mains socket.
After switching on the power supply, the LED starts to flash
green and the red LED flashes during the boot process.
Readiness for operation
The HomePilot® is ready to use once the LED lights up green
continuously and the red LED is off.
46