Digitax F3 Plus Technical Manual page 29

Progr ramming
Here follo ows the comple
Nr r. Functions s
1
Index fo di isplayed tariff
This is the numb ber or letter to be disp
The display can show one of the follo
DISPLAY "0"
NORMAL 0
BLINKING 16
Using the value e 35 the display will n
instead of 1 digi t plus 4 digits.
Distance of firs st unit: the distance th
2
The allowed valu ue goes from 0.1 (min
Distance of sec cond unit: the distanc
3
If the second un nit distance is the sam
distance is given n in metres with an ac
decimal point) w will flash.
Distance of foll lowing units: the dist
4
If the third and h higher unit distance is
distance will be used. The distance is
The allowed valu ue goes from 0.0 (min
Waiting-time of f first unit: the waitin
5
goes from 0.1 (m min) to 6553.5 (max).
Waiting-time of f second unit: the wa
6
If the second un nit waiting-time is the s
will be used. The e waiting-time is given
The allowed valu ue goes from 0.1 (min
Waiting-time of f following units: the
7
If the third and h higher unit waiting-tim
second unit wait ting-time will be used.
indicating multip ples of 0.1 sec. (so at
8 Cost of first un nit: the cost that corre
65535 (max). Se ee Q.273 and Q.274 f
9 Cost of second d unit: the cost that c
need to be given n. Automatically the fi
The allowed valu ue goes from 0 (min)
10 Cost of followi ing units: the cost th
third and higher r unit cost does not n
allowed value go oes from 0 (min) to 65
11 Cost of fare-sta art (Initial Amount):
The allowed valu ue goes from 0 (min)
Cost of fare-mi inimum: the minimum
12
The allowed valu ue goes from 0 (min)
The informat tion contained here
party is strictl ly prohibited.
Paramet ters
ete list of F1 ta ariff parameter
f
played on the digit on the left hand-side of t
owing numbers or lette ers either in normal m
"1" "2" "3" " "4" "5"
1 2 3 4 5
17 18 19 20 21
ot be used anymore for the tariff-index, bu
TAR
hat corresponds with the first unit of the far
n) to 6553.5 (max). Th he digit indicating mult
ce that corresponds w with the second unit of
me as the first unit dista ance then the second
ccuracy of 0.1 m. The allowed value goes fr
tance that correspond ds with the third and h
the same as the seco ond unit distance then
s given in metres with an accuracy of 0.1 m
n) to 6553.5 (max). Th he digit indicating mult
g-time that correspon ds with the first unit o
The digit indicating m multiples of 0.1 sec. (s
aiting-time that corres ponds with the secon
same as the first unit w waiting-time then the
n in seconds with an a accuracy of 0.1 sec.
n) to 6553.5 (max). Th he digit indicating mult
e waiting-time that cor rresponds with the thir
e is the same as the s second unit waiting-tim
. The waiting-time is g given in seconds with
the right of the decim al point) will flash.
esponds with the first u unit of the fare. The co
for adding a fixed dec imal point.
corresponds with the second unit of the far
rst unit cost will be us sed. The cost is given
to 65535 (max). See Q.273 and Q.274 for
hat corresponds with t the third and higher u
need to be given. Au tomatically the secon
5535 (max). See Q.27 73 and Q.274 for addi
the initial cost that sh hould be displayed at
to 65535 (max). See Q.273 and Q.274 for
m cost that should be d displayed at the end o
to 65535 (max). See Q.273 and Q.274 for
are property of DIG GITAX Automotive
rs. They are 42 29 questions t
the secondary (small) display.
mode or in blinking mod de (add 16 to the cho
"6" "7" "8" " "9" "A"
6 7 8 9 10
22 23 24 4 25 26
ut becomes available e for other purposes.
RIFF PARAMET TERS
re. The distance is giv ven in metres with an a
tiples of 0.1 m (so at t the right of the decima
f the fare.
d unit distance does no ot need to be given. A
from 0.1 (min) to 6553 3.5 (max).The digit ind
higher units of the fare e.
n the third and higher unit distance does no
m.
tiples of 0.1 m (so at t the right of the decima
of the fare. The waiting g-time is given in seco
so at the right of the de ecimal point) will flash
nd unit of the fare.
second unit waiting-ti ime does not need to
tiples of 0.1 sec. (so a at the right of the deci
rd and higher units of the fare.
me then the third and higher unit waiting-tim
an accuracy of 0.1 se ec. The allowed value
ost is given in the loca al currency with an ac
re. If the second unit cost is the same as t
in the local currency with an accuracy of 1
adding a fixed decima al point.
units of the fare. If the e third and higher uni
nd unit cost will be us sed. The cost is give
ng a fixed decimal po oint.
t the beginning of a n new fare. The cost is
adding a fixed decima al point.
of a fare in stopped po osition. The cost is giv
adding a fixed decima al point.
Electronics Italy, an nd extremely confid
o the user.
sen value):
"B" "C" "D" " "E"
11 12 13 3 14
27 28 29 9 30
So, the secondary dis splay becomes one o
accuracy of 0.1 m.
al point) will flash.
Automatically the first unit distance will be u
dicating multiples of 0. .1 m (so at the right o
ot need to be given. Au Automatically the seco
al point) will flash.
onds with an accuracy y of 0.1 sec. The allow
h.
be given. Automatica ally the first unit waitin
mal point) will flash.
me does not need to b be given. Automatical
goes from 0.1 (min) t to 6553.5 (max). The
ccuracy of 1. The allow wed value goes from
he first unit cost then n the second unit cost
.
t cost is the same as s the second unit cost
en in the local currenc cy with an accuracy
given in local currenc ncy units with an accu
ven in local currency u units with an accuracy
dential. Any disclos sure, copying, distrib
Value e
" F"
15 1
31 3
of 5 digits
0.1 - 65 553.5
metres
0.1 - 65 553.5
used. The
metres
f the
0.1 - 65 553.5
nd unit
metres
wed value 0.1 - 65
553.5
seconds
0.1 - 65 553.5
g-time
seconds
0.1 - 65 553.5
ly the
seconds
digit
0 (min) to 0 - 65535 5
t does not 0 - 65535 5
t then the 0 - 65535 5
of 1. The
racy of 1. 0 - 65535 5
y of 1.
0 - 65535 5
29
bution to third