Sony HDCU2500 Maintenance Manual page 87

S03: MULTI FORMAT
Note
COMPONENT displayed only when HKCU1003 is installed
Menu Image
<MULTI FORMAT> S03 TOP
FREQUENCY HD: 1.001
SD: 525(NTSC)
CAMERA FORMAT
1080/59.94I
FRAME CONVERT DELAY: 1.6
CCU VIDEO CONVERT: DSB
HD-SD DELAY : Line(90H)
*1: When CCU VIDEO CONVERT is set to ENB, the CCU internal video conversion is delayed, so adjust the camera's signal by advancing
it as necessary.
HDCU2500
Item
FREQUENCY
HD
FREQUENCY
SD
CAMERA
FORMAT
0usec
FRAME CON-
VERT DELAY
CCU VIDEO
CONVERT
×2 MODE
HD-SD DELAY
COMPONENT
Settings Description
1.001, 1.000 Selects the operating fre-
quency.
(525NTSC), (625PAL)
When FREQUENCY is set Selects the transmission for-
to 1.001: 1080/59.94I, mat.
1080/29.97PsF,
1080/59.94P,
1080/23.98PsF, 720/59.94P,
1080/59.94I (RGB444),
1080/29.97PsF (RGB444),
1080/23.98PsF (RGB444),
1080/59I (×2), 720/59P (×2)
When FREQUENCY is set
to 1.000: 1080/50I,
1080/25PsF, 1080/50P,
1080/24PsF, 720/50P,
1080/50I (RGB444),
1080/25PsF (RGB444),
1080/24PsF (RGB444),
1080/50I (×2), 720/50P (×2)
0.8, 1.2, 1.6 Sets the output delay for
framerate-converted signals.
(Displayed only when FRE-
QUENCY HD is set to
1.001.)
Sets video conversion. To set
*1
DSB, ENB
to ENB, set FRAME SYN-
CHRO in RETURN SETUP
(S07) to ON.
1, 2 Sets the output format to 2×
frame output. The CCU out-
put format changes.
1: Output by aligning with
field. (Compatible with devi-
ces other than SRW-1/5800.)
2: Output by aligning with
frame. (Compatible with
SRW-1/5800.)
Displayed only when CAM-
ERA FORMAT is set to
1080/59.94I (×2), 1080/50I
(×2), 720/59.94P (×2) or
720/50P (×2).
Line (90H), Frame (1F), 0- Sets the phase output for SD
Delay signals down converted from
this unit's HD signals.
RGB, YCD Selects the component signal
connector's output format.
3-11