Sony HDCU2500 Maintenance Manual page 127

3. Remove the harnesses from the wire saddle, and disconnect the harnesses from the connector CN101, CN102 and
CN103 on the PS-778D00 board.
4. Remove the wire saddle.
Harnesses
CN101
CN103
5. Remove the two screws to detach the front panel (E).
6. Remove the soft shield A.
7. Remove the two screws to detach the main chassis cover.
Soft shield A
HDCU2500
Wire saddle
Harness
CN102
Main chassis cover
Front panel (E)
K3 x 6
K3 x 6
K3 x 6
4-9