1-11-3.
Front Side (HKCU1001/1003)
1.
Loosen the two coin screws, and open the front panel. (Refer to
Panel")
2.
Insert the EN-159A board or EN-159B board into slot 3.
Notes
• Put the board on the groove at the bottom of the slot and then push it straight.
• Check that the board is securely connected to the MB-1181 board.
Slot
3.
Close the front panel and secure it with two coin screws.
HDCU2500
1 2 3
EN-159A board (HKCU1001)
EN-159B board (HKCU1003)
"4-3-1. Removal and Installation of Front
1-26