Explanation Of The Symbols On The Device - Scheppach TIGER 2000S Translation Of Original Instruction Manual

1. Explanation of the symbols on the device

m
Warning! The electrical connection must be established by an electrician and must comply with IEC 364. It is recommended
that a residual current circuit breaker be installed in the electrical connection to this device, which disconnects the mains
voltage if the residual current circuit breaker exceeds 10mA for 30 ms.
 www.scheppach.com /  service@scheppach.com /  +(49)-08223-4002-99 /  +(49)-08223-4002-58
Observe warnings and safety instructions!
Read the operating and safety instructions before start-up and follow them!
Wear eye protection!
Wear hearing protection!
If dust builds up, wear respiratory protection!
Danger of injury due to a rotating tool! Keep your hands away.
Keep third-parties away from the danger zone.
GB | 17