Fujitsu FibreCAT S80 Manual page 51

If you drag the mouse pointer over a HBA without clicking,
this will display the corresponding WWNN (World Wide Node Name) of the Host
HBA
.
The difference between the WWNN and the WWPN (World Wide Port Name)
will be clear from the symbol figure below.
FibreCAT S80 port names:
Port 3
Port 4
IMPORTANT:You must record all the SAN-LUN map settings.
See Chapter "Recording the Configuration".
U41578-J-Z875-1-76
WWNN: 20.00.00.03.38.00.8F.BC
WWPN: 22.00.00.03.38.00.8F.BC
WWPN: 23.00.00.03.38.00.8F.BC
WWPN: 24.00.00.03.38.00.8F.BC
WWPN: 21.00.00.03.38.00.8F.BC
RAID wizard
Port 2
Port 1
47