PowerBox Systems GEMINI II Instruction Manual page 2

Dear customer,
We are delighted that you have decided to purchase the PowerBox Gemini II po-
wer supply from our range.
We hope you have many hours of pleasure and great success with your Power-
Box Gemini II.
PRODUCT DESCRIPTION
The Gemini II is the logical development of the PowerBox Gemini, which we
have produced un-changed since 2005. The revised design incorporates ideas
gleaned from customer requests and our own experience. The Gemini II has a
considerably higher performance than the earlier model, since the case now con-
sists of a high-quality machined aluminium heat-sink. Numerous supplementary
features have also been added. For example, the pilot now has two options for
activating the system: either by push-button using the SensorSwitch, or using
a magnet. This also allows the implemen-tation of a concealed installation; in
this case an integral buzzer indicates the ON and OFF state. Like all power supply
systems from PowerBox-Systems, the Gemini II boasts consistent redundant
con-struction: two regulators, two controllers and two integral Hall sensors en-
sure a totally reliable power supply. The external SensorSwitch activates both
electronic switches simultaneously. The tri-colour LEDs in the SensorSwitch in-
dicate the battery status in four stages. The battery inputs take the form of MPX
high-current connectors.
The output voltage is double-regulated, and can be set either to 5.9 V or 7.4 V.
2 PowerBox-Systems − World Leaders in RC Power Supply Systems