General Description; Features; Regulatory Specifications - Assa Abloy Corbin Russwin Access 600 ML20600 TCRNE1 Series Installation Instructions Manual

ML20600 Series Mortise Lock
The Corbin Russwin Access 600 TCRNE1 Series mortise lock is designed to interface with existing Wiegand
Electrical Access Control (EAC) panels. The reader requires 12VDC for power and is available with 125 kHz HID
proximity technology. The Access 600 technology is designed around Corbin Russwin's Grade 1 hardware.
The mortise lock comes with complete door monitoring which is all integrated inside the lockbody (RX – Request
to Exit & DPS – Door Position Switch) and is available in 12VDC or 24VDC. Weather seal gaskets are also
included for outdoor applications. The Access 600 reader provides visual (LED) and audible indication of lock
state (locked/unlocked).
• Latch - Stainless steel 3⁄4" projection one-piece
• Deadbolt - One-piece hardened stainless steel
• Guardbolt - Stainless steel, non-handed
• Handed - Easily field reversible without opening case
• Case - 12 gauge heavy duty wrought steel
• Outside lever controlled by any 125 kHz HID prox credential
• Inside lever provides RX signal and retracts latch and deadbolt
• Fail Safe or Fail Secure Operation (must specify)
• UL fire listed
• Wire from EAC Panel to door must be shielded with a drain.
Drain terminated at EAC Panel controller
• Wires directly to EAC Panels
• Accepts all HID 125 kHz Bit formats
• McKinney QC12 Hinge with ElectroLynx plug and play
12/24VDC System
• Reader Draw = 150mA @12VDC
• Actuator Draw = 400mA inrush,
• Total System Draw = 550mA
• UL294 6th Edition (Access Control System Units)
• This product meets the requirements of CAN/ULC-S319-05 Equipment Class I
• ANSI/BHMA A156.25 Listed Grade 1 Compliant
Wiring methods shall be in accordance with the National Electrical Code (ANSI/NFPA70), CSA 22.1, Canadian Electrical
Code (CEC), Part I, Safety Standard for Electrical Installations, local codes, and the authorities having jurisdiction.

2) General Description

4) Regulatory Specifications

15mA Continuous

3) Features

• UL 294 Access Control Performance Ratings:
Destructive Attack
Line Security
Endurance
Standby Power
4
Wiegand Access
Control System
(Other)
12VDC: Optional 24VDC
Lock Available
Reader is always 12VDC
McKinney
Electric
ML20600
Hinge
Series Lock
Patent Pending
Level I
Level I
Level IV
Level I
Copyright © 2017 Corbin Russwin, Inc. All rights reserved.
Reproduction in whole or in part without the express written
permission of Corbin Russwin, Inc. is prohibited.