Table of Contents
Advertisement
7. Factory defaults menu
Use this menu to return all settings, including device settings, to factory defaults.:
1. Enter 7 and press Enter to access the factory
defaults menu (Figure 27), or if you do not
need to use this menu, press Enter to exit
programming.
2. Press the * key to confirm factory default
activation (Figure 28). During the default
process, the display will show DGP is
defaulting, please wait. Do not exit this
menu until the default process is complete.
Figure 27. Factory default menu
7. Factory defaults
0 - EXIT, Menu:
Figure 28. Confirm factory defaults
Set factory defaults?
* = Yes, # = No
19
Advertisement
Table of Contents
