Table of Contents
Advertisement
Programming
Program settings for the DGP through the onboard menu. To access this menu, do the following:
1. Press Menu.
2. Enter 1278, and press Enter.
3. Enter 19 (installer menu) and press Enter.
4. Press the * key (advanced programming mode).
5. Enter 28 (access remote device programming) and press Enter
6. Enter 1 (DGP option) and press Enter.
7. Enter the address number for the point ID DGP and press Enter.
The following programming menus are available and explained in detail in this section:
1. DGP status
2. Device status
3. Device settings
4. Reset settings
5. Learn mode
6. DGP mode
7. Factory defaults
Use the navigation tools shown in Table 4 to access the programming options.
Table 4.
Programming navigation tools
Key
* / Menu
# / Enter
0
Description
Scroll backward within the menu.
Scroll forward within the menu.
Exit the menu and scroll to the next menu.
11
Advertisement
Table of Contents
