Table of Contents
Advertisement
12
AL-1291 Point ID DGP
Installation Manual
1. DGP status menu
The DGP status menu is a read-only menu. Use this menu to view DGP status information including:
•
Operation status
•
Number and status of devices
•
Input and output range
•
Voltage supplied to the DGP
•
Current consumption.
Enter 1 and press Enter to access the DGP status
menu (Figure 7), or if you do not need to use this
menu, press Enter to scroll to
on page 13.
Operational status. Figure 8 shows normal
operational status. If there is a tamper or device-
missing status, the display will show DGP Tamper.
Number and status of devices. Figure 9 shows the
number of devices known to the system, the number
of devices in alarm, and the number of devices that
have a tamper status.
Input and output range. Figure 10 shows the DGP
number with the associated zone (input) and relay
(output) numbers.
Voltage supplied to the DGP. Figure 11 shows the
voltage supplied to the DGP.
Curren consumption. Figure 12 shows the current
consumption (total load on the power supply) of the
DGP and devices.
2. Device status menu
Figure 7. DGP status
1. DGP status
0 - EXIT, Menu:
Figure 8. Operational status
Operating
* = -, # = +, 0 = EXIT
Figure 9. Number and status of devices
Dev:16 A:0 T:0
* = -, # = +, 0 = EXIT
Figure 10. Input and output range
DGP 1 I:17-32, O:17-32
* = -, # = +, 0 = EXIT
Figure 11. Voltage supplied to the DGP
V-bus 13.4 VDC
* = -, # = +, 0 = EXIT
Figure 12. Current consumption
I-bus 100 mA
* = -, # = +, 0 = EXIT
Advertisement
Table of Contents
