KERN KFB-TAM Operating And Installation Instructions page 102

7.9 Automatic adding-up
With this function the individual weighing values are automatically added into the
summation memory when the balance is unloaded without pressing
when an optional printer is connected.
• Menu settings:
„P1 COM" or „P2 COM  „MODE"  „AUTO"", see chap. 8
Der Indikator
Add up:

Place weighing goods A.
After the standstill control sounds a signal tone. The weighing value will be added
to the summation memory and printed.

Remove the weighed good. More weighed goods can only be added when the
display ≤ zero.

Place goods to be weighed B.
After the standstill control sounds a signal tone. The weighing value will be added
to the summation memory and printed. Number of weighing, followed by the total
weight will be displayed for 2 sec.

Add more weighed goods as described before.
Please note that the weighing system must be unloaded between the individual
weighing procedures.

This process may be repeated 99 times or till such time as the capacity of the
weighing system has been exhausted.
Display and delete the weighing data, as well as printout examples see chap.
7.8.
34
wird angezeigt.
AUTO
and edited,
KFB/KFN-TAM-BA_IA-e-1832