Precautions - RKI Instruments SD-1GH Operating Manual

2-3. Precautions

CAUTION
Do not use a transceiver near the detector.
Radio waves from a transceiver near the detector or its cables may disturb the reading. If a
transceiver is used, it must be used in a place where it does not disturb the reading.
Wait for five seconds or more before restarting the detector.
Restarting the detector within five seconds may cause errors.
Do not use the external output of the detector to control other units.
This is not a control unit.
Do not disassemble/modify the detector or change the settings unnecessarily.
Disassembling/modifying the detector will invalidate the warranty of the performance. Changing the
settings without understanding the specifications may cause alarm malfunctions. Please use the
detector properly in accordance with the operating manual.
Avoid applying solvents to the window plate.
The window plate material is a polycarbonate resin. When solvents (liquid or highly-concentrated
vapor) are applied to the plate, its color and shape may change.
Perform regular maintenance.
Since this is a safety unit, regular maintenance must be performed to ensure safety. Continuing to
use the detector without performing maintenance will deteriorate the sensitivity of the sensor, thus
resulting in inaccurate gas detection.
SD-1GH
- 7 -