2) Assemble the waste disposal set and the thread stand.
3-2. Installing the pedal sensor
❶
3) Assemble the motor starting pedal ❺ to the left side, and the presser foot pedal ❻ to the right side.
1) Ins tal l the pedal sens or to the table wi th
mounting screws ❶ supplied with the unit.
It is necessary to install the pedal sensor at such
a position that the connecting rod is perpendicu-
lar to the table.
2) After the completion of installation of the pedal
sensor on the table, place the sewing machine
head on the table.
❺
– 4 –
❻