Installation; Installing The Electrical Box; Installing The Pedal Sensor - JUKI LK-1900S-SS Instruction Manual

3. INSTALLATION

3-1. Installing the electrical box

❷

3-2. Installing the pedal sensor

❷
Install control box ❶ to the location illustrated in the
figure using four bolts ❷ , four plain washers ❸ and
four spring washers ❹ and four hexagonal nuts ❺
supplied with the unit.
Bolt ❷ is a cup head square neck bolt (M8;
Length: 70 mm) and nut ❺ is a hexagonal
❸
nut (M8).
❹
❺
❶
Install the pedal sensor ❶ to the table with mounting
screws ❷ supplied with the unit.
❶
－ －
4