probst QUICKJET QJ-600-E Operating Instructions Manual page 45

Operating Instructions
QJ 600-E
Only suction plates of the manufacturer PROBST shall be used!!!
 Some suction plates which can be mounted to the device will reduce its carrying capacity.
The maximum load is indicated on each suction plate.
 Use only suction plates which are
Do not exceed

Danger: Load (stone slabs) will fall down!
● The load (stone slabs) which is to be sucked and
transported, must have sufficient inherent stability,
otherwise there is risk of breakage when lifting!
● Stone slabs must not be bend when lifting - especially
take care with thin and large-sized stone slabs!
● Generally, the load (stones slab) is only to be sucked in
the middle, otherwise the load hangs diagonally under
the device and the load could break - especially when
lifting large stone slabs with a small suction plate.
● Standard suction plates are not suitable for the transport
of glass plates!
Pos : 12 /=============================== @ 0\mod8_2.doc x @ 5159 @ @ 1
13 / 25
approved
the maximum carrying capacity of the suction plates!!!
General
for this device!
GB