Levolor Roman Shades Series Installation Manual page 18

INSTALLATION
OUTSIDE MOUNT (OM)
STEP 3: INSTALLING BATTERIES INTO THE BATTERY WAND
• Squeeze the cap latch to release the cap.
• Remove the cap from the battery wand.
• Install the batteries according to the
instructions on the battery pack label
(AA alkaline batteries are recommended.
Lithium and rechargeable batteries are
not recommended).
(Skip this step if your shade will not have an attached battery wand.)
• Attach the battery wand clip to the headrail. Make sure to position the clip so
that the battery wand will be between installation brackets.
— Hook the battery wand clip onto the back channel of the headrail.
— Rotate the clip down until it snaps into place.
18
Battery-Powered Motorized Operating System
Tab
Cap
Squeeze Latch
Battery Wand Clip
Front of
Headrail
Slot
Battery
Pack
Battery Wand Clip
High Mount (Standard)
Snap in
Place