Levolor Roman Shades Series Installation Manual page 15

2"
• Center the brackets on your marks, then mark each of the
screw holes.
— A minimum of 1
the brackets.
— The top of the installation brackets or extension brackets
should be at the desired shade height. The brackets should
be level and aligned.
— When using extension brackets, mark two screw holes
per bracket.
CAUTION: The rear of the brackets must be flush against a flat mounting
!
surface. Do not mount brackets on curved molding.
Headrail End Marks
Space Evenly
Window Opening
⁄ " flat vertical surface is required to mount
1
4
Battery-Powered Motorized Operating System
INSTALLATION
Minimum of 15" for Battery Wand
Space Evenly 2"
Motor
Side
15