8. Loosen by one turn the two M4 screws on the lens supporter, shown below.
9. Adjust the boresight.
For information on how to adjust boresight, refer to the product Installation and Setup guide.
10. Tighten the two screws from step 8.
11. To ensure the Lens Shift function cannot be executed after the boresight has been adjusted,
from the on-screen display, navigate to Configuration > Lens setting > Lock all Lens
Motors and select Locked.
Technical support
Technical support for Christie products is available at:
•
North and South America: +1-800-221-8025 or Support.Americas@christiedigital.com
•
Europe, Middle East, and Africa: +44 (0) 1189 778111 or Support.EMEA@christiedigital.com
•
Asia Pacific
•
Australia: +61 (0)7 3624 4888
•
China: +86 10 6561 0240
•
India: +91 (80) 6708 9999
•
Japan: 81-3-3599-7481
•
Singapore: +65 6877-8737
Installing the Ultra Short Throw Lens Instruction Sheet
020-103312-03 Rev. 1 (10-2020)
Copyright
©
2020 Christie Digital Systems USA, Inc. All rights reserved.
Installing the ultra short throw lens
8