Dynamix Mode Switch; Comfort Mode - Polaris RIDE COMMAND User Manual

DYNAMIX ACTIVE SUSPENSION (IF EQUIPPED)

DYNAMIX MODE SWITCH

This RZR is equipped with a suspension control mode switch that allows you to
change the suspension control mode of your DYNAMIX™ Active Suspension
system on-the-fly. There are 3 available drive modes to select from: Comfort,
Sport, and Firm.
The rider should use caution to select the appropriate ride mode to match the
current terrain conditions and driving style. Failure to select an appropriate ride
mode could lead to vehicle dynamic behaviors not matched to the terrain or
The system will prevent mode transitions from a more firm operating mode to a
more soft operating mode when a current active vehicle state is present
COMFORT
In Comfort mode, the
suspension control system
is primarily optimized for
rider comfort, intervening in
performance situations
where required. The
system will gradually
increase the base value of
damping as vehicle speed
increases. Cornering,
braking, acceleration, and
airborne detection
algorithms are fully active.
driver's skill level.
(cornering, braking, accelerating, or airborne).
WARNING
NOTICE
47