Polaris RIDE COMMAND User Manual page 48

DYNAMIX ACTIVE SUSPENSION (IF EQUIPPED)
ACCELERATION
The system continuously
monitors vehicle speed,
and accelerator pedal
position to increase
damping of the rear shocks
under high straight line
acceleration conditions to
keep the vehicle level.
AIRBORNE DETECTION
The system continuously
monitors the state of the
vehicle using its 6-axis
inertial measurement unit.
When low-g situations are
encountered, the system
provides maximum
damping until the low-g
situation is no longer
present, after which it
reverts back to the user-
selected drive mode.
ADVANCED DIAGNOSTICS
The system continuously monitors the health and state of all input and output
signals. If a fault is detected, the system reverts to a safe operating state and
alerts the operator of a component or system problem.
PROCESSING CAPABILITY
DYNAMIX™ Active Suspension controls current to the shock valve 1000 times
per second, performs vehicle dynamics calculations 200 times per second, and
can actuate a shock from soft to firm approximately 20 times per second.
46