Table of Contents
Advertisement
Installation of the cover frame panels
Triangular sealing tape, top
Top panel
Rafter
Cover tiles
3062815_0110
15. Roof integration, high roof tiles
(convex - concave tiles)
Clamp (2 pce. per top panel)
Woodscrew 4x60
Timber spacer
Batten height
Hook in the casing panels on the left and right in accordance with the diagram and secure
them with clamps.
Push the casing panels at the top onto the collector frame. As support on each rafter, a
timber spacer of batten height must be fitted below the casing panel. Secure the casing
panel with clamps.
Push the protective edge profiles at the casing panel joint at the top over the return,
see the diagram.
Affix the triangular sealing tape at the side and top onto the casing panels.
Edge protector
Triangular sealing tape
at the top and side
Side panel
Triangular
Clamp
sealing tape
(3 pce. per side panel)
Hook in side panel
Batten
Woodscrew
4x30
Batten
35
Advertisement
Table of Contents
