Table of Contents
Advertisement
Standard delivery
Installation parts
Side panel
Flashing tape
base, L.h.
Flashing tape
Standard dimensions for
determining the position of
the collector array
Collector array width
Width with flashing pieces /
lift plates
Number of collectors
Width of the collector array [m]
Width with flashing pieces / lift plates [m]
3062815_0110
14. Roof integration, slate roof
For safety reasons, the [German] roofing contractor's association specifies a covered
NB
substrate with bitumen sheeting, reinforced foil or other suitable material below the
collector area to prevent the ingress of moisture into the building in case of leaks. This
sub-roof must terminate in the roof gutter.
Top mounting rail
Flashing pieces /
lift plates
Connecting rail
Bottom mounting rail
Width with flashing pieces /
2
3
2.36
3.49
2.56
3.69
Edge protector
Intermediate
Flashing
panels
pieces / lift
plates
Timber spacer of 15 to 30 mm
height to match to the battens
Collector array width
lift plates
Align to the left or right
4
5
6
4.62
5.75
6.88
4.82
5.95
7.08
Top cover panels
Side panel
Flashing tape base, R.h.
Screws, nuts, grub screws,
woodscrews in a bag
7
8
9
8.01
9.14
10.27
8.21
9.34
10.47
10 *)
11.40
11.60
23
Advertisement
Table of Contents
