Table of Contents
Advertisement
Installation of the cover frame panels
Triangular sealing tape
at the top
Top panel
Rafter
22
13. Roof integration, interlocking tile
Woodscrew
Clamp (2 pce. per top panel)
4x60
Timber spacer
Height = batten
1. Hook in the casing panels on the left and right in accordance with the diagram
and secure them with clamps.
2. Push the top casing panels over the collector frame. As support on each
rafter, a timber spacer of batten height must be fitted below the casing panel.
Secure the casing panel with clamps.
3. Push the protective edge profiles at the casing panel joint at the top over
the return, see the diagram.
4. Affix the side and top triangle sealing tape to the casing panels.
5. Position the tiles around the cover frame; if necessary use half tiles or trim
tiles to size.
(0.5-12 cm)
Side panel
Triangular sealing tape
Woodscrew
approx.
4x30
5 cm
Affix the triangular sealing tape
Edge protector
Triangular sealing tape
at the top and side
Hook in side panel
Batten
Woodscrew
4x30
Batten
Clamp (3 pce.
per side panel)
3062815_0110
Advertisement
Table of Contents
