Check On The Actual Unit; Creating A Ladder - Omron NA Series Practices Manual

５

Check on the Actual Unit

This chapter describes the procedure to transfer the project data of Sysmac Studio to an NA
unit to check the operation.
If you do not have any actual unit, you can check the operation with the integrated
simulation function described in Chapter 6.
５-１ Creating a Ladder
５-１-１ Creating a Ladder
Input the ladder for checking the operation.
1.
Change the project to "NJ_1".
2.
Double-click
[Programming]-[POU]-[Programs]-[
Program0]-[Section0].
3.
Enter the ladder program shown on
the right.
57