Basic Settings; Adding An Na - Omron NA Series Practices Manual

３

Basic Settings

This chapter describes the basic procedure to create an NA project, to specify
communication settings, and to register variables.
３-１ Adding an NA
３-１-１ Adding an NA
1.
Add an NA to the project.
Select [Insert]-[HMI]-[NA5].
2.
Select an option from among the
list according to the actual unit.
For example, if you use a 12-inch
model, select "12W001□".
For details on models, refer to
Chapter 7.
3.
Select the version.
4.
An NA is now added, and the
display is changed accordingly.
15