Omron NA Series Practices Manual page 59

５-２-２ Synchronization with NA
Subsequently, synchronize with NA to transfer the configurations and settings as well as the
programs of the NA.
1.
Swtich the project to "NA_1".
2.
Select [HMI]-[Communications
Setup...].
3.
Select "Ethernet connection via a
hub".
4.
Enter the IP address of the NA to
be connected in [Remote IP
Address].
Click [Test] and confirm that "Test
OK" appears. Then click [OK].
5.
Click the icon to connect to NA
online.
6.
Click the icon to execute
synchronization.
7.
Click [Transfer To Device].
59