Omron NA Series Practices Manual page 13

２-２-３ Changing the Controller Name
1.
For easy identification, change the
controller name.
Right-click the NJ icon and select
"Rename".
2.
Change the controller name to
"NJ_1".
２-２-４ Confirming the IP Address
To connect NJ with Sysmac Studio via EtherNet/IP
as described below.
1.
Double-click [Configurations and
Setup]-[Controller Setup]-[Built-in
EtherNet/IP Port Settings].
2.
Confirm that the IP address is
specified as "192.168.250.1".
TM
, confirm the IP address of the NJ side
13