Specifications And Dimensions; Optional Equipment - Barmesa Pumps BSP-CCE Series Installation, Operation & Maintenance Manual

SUCTION / DISCHARGE:
LIQUID TEMPERATURE:
INTERMEDIATE:
VOLUTE:
BODY:
BASE:
IMPELLER:
SHAFT:
HARDWARE:
SQUARE RINGS:
PAINT:
SEAL:
CHECK VALVE:
MOTOR:

OPTIONAL EQUIPMENT:

barmesapumps.com
1½", 2" & 3" NPT, female.
160° F (71° C) max.
Cast iron ASTM A-48 class 30.
Cast iron ASTM A-48 class 30.
Cast iron ASTM A-48 class 30.
Steel
2 vane, open, trash type, dynamically balanced. Cast iron ASTM A-48 class 30.
416 series stainless steel.
Steel & stainless steel.
Buna-N.
Air dry enamel, water based.
Mechanical, self lubrication. Ceramic stationary part, carbon ring seal and exclusion
in the rotating part. Buna-N elastomer and stainless steel spring.
Flap-neoprene. Steel.
Open Drip Proof or TEFC, C-face, footed, squirrel cage induction, class B or F
insulation.
Single phase: 115/230 volts, 60 Hz, 3450 RPM.
Three phase: 230/460 volts, 60 Hz, 3450 RPM.
Bronze fitted volute and impeller.
Specifications & Dimensions
02