Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Barmesa Pumps BSV Series
Summary of Contents for Barmesa Pumps BSV Series
- Page 1 Installation, Operation & Maintenance Manual Submersible Stainless Vortex Sewage Pump BSV series 0.5-10 HP @ 3450 RPM barmesapumps IMPORTANT! - Read all instructions in this manual before operating or servicing a pump. Last update: 12/13/2022...
-
Page 2: General Safety Information
Model Number, Serial, Amps, i n t e n d e d f o r u s e i n Voltage, Phase and HP from pump IMPORTANT! - Barmesa Pumps is not swimming pools or water name plate for the future reference. -
Page 3: Specifications And Dimensions
Specifications & Dimensions DISCHARGE: 2", 3" & 4" NPT elbow, vertical. SPHERICAL SLD HNDLG: 1.35" (35 mm) for 2" discharge and 1.75" (45 mm) for 3" & 4" discharge LIQUID TEMPERATURE: 104 °F (40 °C) max. VOLUTE: 316 series stainless steel MOTOR HOUSING: 316 series stainless steel SEAL PLATE:... - Page 4 Specifications & Dimensions 40.5 - 1 HP C.W.L. barmesapumps L.W.L. MAX. Ø DISCHARGE MAX. FLOW CORD SPH SLD MODEL VOLTS PHASE AMPS DISCHARGE MAX. (m) (GPM) (ft) HNDLG 2BSV-051DS 2" 1.35" 2BSV-054DS 2" 1.35" 2BSV-101DS 2" 1.35" 2BSV-102DS 2" 1.35" 2BSV-103DS 2"...
- Page 5 Specifications & Dimensions 42 - 3 HP barmesapumps MAX. Ø DISCHARGE MAX. FLOW CORD SPH SLD MODEL VOLTS PHASE AMPS DISCHARGE MAX. (m) (GPM) (ft) HNDLG 2BSV-202DS 2" 155.8 1.75" 2BSV-203DS 2" 155.8 1.75" 2BSV-204DS 2" 155.8 1.75" 2BSV-303DS 2" 1.75"...
- Page 6 Specifications & Dimensions 45 - 7.5 HP barmesapumps MAX. Ø DISCHARGE MAX. FLOW CORD SPH SLD MODEL VOLTS PHASE AMPS DISCHARGE MAX. (m) (GPM) (ft) HNDLG 3BSV-503DS 3" 1.75" 3BSV-504DS 3" 1.75" 3BSV-753DS 3" 290.5 1.75" 3BSV-754DS 10.5 3" 290.5 1.75"...
- Page 7 Specifications & Dimensions 410 HP barmesapumps MAX. Ø DISCHARGE MAX. FLOW CORD SPH SLD MODEL VOLTS PHASE AMPS DISCHARGE MAX. (ft) (GPM) (ft) HNDLG 4BSV1003DS 4" 1.75" 4BSV1004DS 4" 1.75" 19.2 4.9 10.6 6.9 90° 45° 90° 45° 24.8 20.3 7.1 10.3 156.5 - Dimensions in inches.
- Page 8 Specifications & Dimensions 410 HP with Slide Rail Coupling barmesapumps A9 A10 27.8 4.9 19.2 3.1 90° 45° 90° 5.9 15.9 9.5 WT WT1 24.4 11.3 4.1 8.1 12.4 12.5 0.4 0.6 156.5 30.6 - Dimensions in inches. * WT = Weight in pounds, without cable. * WT1 = Slide Rail Coupling weight.
-
Page 9: Installation
Installation 4Receiving inspection 2. Install the pump at a location in Upon receiving the pump, it should the tank where there is the least inspected damage turbulence. shortages. If damage has occurred, file a claim immediately with the 3. If there is a flow of liquid inside company that delivered the pump. -
Page 10: Electrical Wiring
Electrical Wiring Single phase (non-automatic) Black (Brown) Thermal protector White (Blue) Green (Yellow/ Green) Frame grounding Ground (Green/Yellow) Single phase (automatic) Float switch Black barmesapumps (Brown) Thermal protector White (Blue) Green (Yellow/ (Green/Yellow) Green) Frame grounding Ground (Green/Yellow) Three phase White Overload protector Black... -
Page 11: Operation And Maintenance
Operation & Maintenance 4 Before Starting the Pump WARNING Monthly inspections: Be sure to cut off power 1) After completing installation, Measure the insulation resistance. source before disassembly. measure the insulation resistance The value should be more than 1M again as described in Installation. 1. -
Page 12: Repair Parts
Repair Parts 40.5-1 HP 19-3 19-6 21-6 22-1 19-6 21-6 19-9 19-2 15-1 15-2 barmesapumps 17-4 20-4 19-4 17-1 17-2 22-1 20-5 21-9 19-7 20-7 17-3 18-2 19-6 21-6 20-7 31-1 For repair part please supply: Model Number and Serial as shown on Name Plate, and Part Description and Part Number as shown on Parts List. -
Page 13: Parts List
Parts List ITEM NAME MATERIAL PHOTO ITEM NAME MATERIAL PHOTO PUMP HANDLE NYLON 6 SUS 316 CASING MOTOR PROTECTOR SUS 316 COVER (3 PHASE) CAPACITOR BRACKET EN-GJL-200 (1 PHASE) SHAFT WITH 15-1 SUS 316 BEARINGS ROTOR 15-2 17-1 OIL CHAMBER EN-GJL-200 O-RINGS VITON... - Page 14 Repair Parts 42-3 HP 45-7.5 HP 22-1 19-3 22-1 19-3 19-6 19-1 21-6 31-2 21-6 31-2 19-10 19-10 19-9 19-9 19-2 19-2 15-1 15-1 15-2 barmesapumps 15-2 17-1 19-6 21-6 22-1 19-6 21-6 19-6 17-2 22-1 21-6 19-6 21-6 20-5 17-3 19-7 21-9...
- Page 15 Parts List ITEM NAME MATERIAL PHOTO ITEM NAME MATERIAL PHOTO HANDLE SUS 316 PUMP CASING SUS 316 (2-3 HP) LIFTING BAIL PROTECTOR SUS 316 (5-7 HP) (3 PHASE) MOTOR MOTOR COVER SUS 316 VITON GASKET ELBOW BRACKET EN-GJL-200 18-1 VITON GASKET FLANGE SHAFT WITH...
- Page 16 Repair Parts 410 HP barmesapumps For repair part please supply: Model Number and Serial as shown on Name Plate, and Part Description and Part Number as shown on Parts List.
- Page 17 Repair Parts 410 HP ITEM NAME MATERIAL CABLE STOW MOTOR COVER AISI 316 MOTOR HOUSING AISI 316 OIL CHAMBER AISI 316 SEAL BRACKET AISI 316 VOLUTE AISI 316 IMPELLER AISI 316 DISCHARGE ELBOW AISI 316 FLANGE AISI 316 MECHANICAL SEAL SIC/SIC CA/CE LIP SEAL VITON...
-
Page 18: Troubleshooting Chart
(4) Strainer is closed too far. (4) Open strainer. NOTE: Barmesa Pumps assumes no responsibility for damage or injury due to disassembly in the field. Disassembly of the pumps or supplied accessories other than at Barmesa Pumps or its authorized service centers, automatically voids warranty. - Page 19 BARMESA PUMPS FACTORY WARRANTY Barmesa Pumps warrants that products of our manufacture will be free of defects in material and workmanship under normal use and service for 18 months from date of manufacture or 12 months from installation date whichever occurs first. This warranty gives you specific legal rights, which vary from state to state.
Need help?
Do you have a question about the BSV Series and is the answer not in the manual?
Questions and answers