Subscribe to Our Youtube Channel
Related Manuals for Barmesa Pumps 2AHS051
Summary of Contents for Barmesa Pumps 2AHS051
- Page 1 Installation, Operation & Maintenance Manual Submersible Dewatering Pumps 2AHS 0.5, 1 & 2 HP @ 3500 RPM barmesapumps.com IMPORTANT! - Read all instructions in this manual before operating or servicing a pump.
-
Page 2: General Safety Information
Model Number, Serial, Amps, i n t e n d e d f o r u s e i n Voltage, Phase and HP from pump IMPORTANT! - Barmesa Pumps is not swimming pools or water name plate for the future reference. -
Page 3: Specifications And Dimensions
Available as "A" Automatic model or Manual operation (no level control). CORD WEIGHT MODEL PART No. HP VOLTS PHASE (Nominal) AMPS SIZE (pounds) 2AHS051 62180101 3500 16AWG/3C 13.86" 9.57" Ø7" 4.25" 4.61" 2AHS051A 62180102 2AHS101 62180103 3500 16 AWG/3C 14.84"... -
Page 4: Installation
Installation Receiving inspection 3. If there is a flow of liquid inside Upon receiving the pump, it should the tank, support the piping inspected damage where appropriate. Install piping shortages. If damage has occurred, so that air will not be entrapped. If file a claim immediately with the piping must be installed in such a company that delivered the pump. -
Page 5: Electrical Wiring
Electrical Wiring Single phase Capacitor Black (Brown) White Main Starting (Blue) Coil Coil Green (Green/Yellow) Protector Frame Grounding Ground Three phase Black (Black) Overload Protector White (Blue) barmesapumps.com (Brown) Green (Green/Yellow) Frame Grounding Ground Figure 3... -
Page 6: Operation And Maintenance
Operation & Maintenance Before Starting the Pump Monthly inspections: WARNING Be sure to cut off power 1) After completing installation, Measure the insulation resistance. source before disassembly. measure the insulation resistance The value should be more than 1M again as described in Installation. 1. - Page 7 Repair Parts Figure 5 2AHS 0.5 HP barmesapumps.com For repair part please supply: Model Number and Serial as shown on Name Plate, and Part Description and Part Number as shown on Parts List.
-
Page 8: Parts List
Parts List 2AHS 0.5 HP ITEM NAME MATERIAL PHOTO ITEM NAME MATERIAL PHOTO PROTECTOR CABLE H07/UL (1 PHASE) (OPTIONAL) PROTECTOR HANDLE NYLON 6 (3 PHASE) MOTOR ADC12 CAPACITOR COVER BRACKET SECC BEARING MOTOR HOUSING ADC12 STRAINER + STATOR SHAFT WITH SUS410 O-RING ROTOR... - Page 9 Repair Parts Figure 6 2AHS 1 HP barmesapumps.com For repair part please supply: Model Number and Serial as shown on Name Plate, and Part Description and Part Number as shown on Parts List.
- Page 10 Parts List 2AHS 1 HP ITEM NAME MATERIAL PHOTO ITEM NAME MATERIAL PHOTO PROTECTOR CABLE H07/UL (1 PHASE) (OPTIONAL) PROTECTOR HANDLE NYLON 6 (3 PHASE) MOTOR ADC12 CAPACITOR COVER BRACKET SECC BEARING MOTOR HOUSING ADC12 STRAINER + STATOR SHAFT WITH SUS410 O-RING ROTOR...
- Page 11 Repair Parts Figure 7 2AHS 2 HP barmesapumps.com For repair part please supply: Model Number and Serial as shown on Name Plate, and Part Description and Part Number as shown on Parts List.
- Page 12 Parts List 2AHS 2 HP ITEM NAME MATERIAL PHOTO ITEM NAME MATERIAL PHOTO CABLE H07/UL PUMP CASING CAST IRON PROTECTOR HANDLE NYLON 6 (1 PHASE) (OPTIONAL) PROTECTOR MOTOR COVER ADC12 (3 PHASE) BRACKET SECC CAPACITOR MOTOR HOUSING ADC12 BEARING + STATOR SHAFT WITH SUS410 STRAINER...
-
Page 13: Troubleshooting Chart
(4)Strainer is closed too far (4) Open strainer NOTE: Barmesa Pumps assumes no responsibility for damage or injury due to disassembly in the field. Disassembly of the pumps or supplied accessories other than at Barmesa Pumps or its authorized service centers, automatically voids warranty.
Need help?
Do you have a question about the 2AHS051 and is the answer not in the manual?
Questions and answers