1MRK 511 243-UEN A
Section 4
The signal and setting tables specify the information types supported by the IEDs with the
communication protocol IEC 60870-5-103 implemented.
The information types are supported when corresponding functions are included in the
protection and control IED.
4.1
Signals in monitoring direction
4.1.1
Measurands for IEC 60870-5-103 I103MEAS
4.1.1.1
Functionality
103MEAS is a function block that reports all valid measuring types depending on connected
signals.
The measurand reporting interval set for MMXU function blocks, using the
xAngDbRepInt settings, must be coordinated with the event reporting interval set for the IEC
60870-5-103 communication using setting
GUID-B8A3A04C-430D-4488-9F72-8529FAB0B17D V1 EN-US
Figure 5:
IEC 60870-5-103, 650 series
Communication protocol manual
IEC 60870-5-103 vendor specific
implementation
Settings for CMMXU: 1
© Copyright 2011 ABB. All rights reserved
IEC 60870-5-103 vendor specific implementation
CycMeasRepTime .
Section 4
M11874-23 v3
GUID-8CA706D7-4AF7-470D-8029-6C30E32ED293 v1
GUID-557FB587-9127-4D99-B2C6-16445E06F220 v1
xDbRepInt and
21