Document Revision History - ABB Relion 650 Series Communication Protocol Manual

Hide thumbs Also See for Relion 650 Series:

Technical manual (754 pages)

Applications manual (382 pages)

Commissioning manual (182 pages)

Table Of Contents

Table of Contents

Section 1

Introduction

The engineering manual contains instructions on how to engineer the IEDs using the different

tools in PCM600. The manual provides instructions on how to set up a PCM600 project and

insert IEDs to the project structure. The manual also recommends a sequence for engineering

of protection and control functions, LHMI functions as well as communication engineering for

IEC 60870-5-103, IEC 61850 and DNP3.

The installation manual contains instructions on how to install the IED. The manual provides

procedures for mechanical and electrical installation. The chapters are organized in

chronological order in which the IED should be installed.

The commissioning manual contains instructions on how to commission the IED. The manual

can also be used by system engineers and maintenance personnel for assistance during the

testing phase. The manual provides procedures for checking of external circuitry and

energizing the IED, parameter setting and configuration as well as verifying settings by

secondary injection. The manual describes the process of testing an IED in a substation which

is not in service. The chapters are organized in chronological order in which the IED should be

commissioned.

The operation manual contains instructions on how to operate the IED once it has been

commissioned. The manual provides instructions for monitoring, controlling and setting the

IED. The manual also describes how to identify disturbances and how to view calculated and

measured power grid data to determine the cause of a fault.

The service manual contains instructions on how to service and maintain the IED. The manual

also provides procedures for de-energizing, de-commissioning and disposal of the IED.

The application manual contains application descriptions and setting guidelines sorted per

function. The manual can be used to find out when and for what purpose a typical protection

function can be used. The manual can also be used when calculating settings.

The technical manual contains application and functionality descriptions and lists function

blocks, logic diagrams, input and output signals, setting parameters and technical data sorted

per function. The manual can be used as a technical reference during the engineering phase,

installation and commissioning phase, and during normal service.

The communication protocol manual describes a communication protocol supported by the

IED. The manual concentrates on vendor-specific implementations.

The point list manual describes the outlook and properties of the data points specific to the

IED. The manual should be used in conjunction with the corresponding communication

protocol manual.

1.3.2