Table of Contents
Advertisement
2.4
Use of unauthorized spare parts
Using unauthorized spare parts can endanger personnel and damage the product or cause
it to malfunction.
• Use only original spare parts or spares authorized by SCHUNK.
2.5
Required ambient conditions and operating conditions
Incorrect ambient and operating conditions can make the product unsafe, leading to the
risk of serious injuries, considerable material damage and/or a significant reduction to the
product's life span.
• Make sure that the product is only used within its defined application parameters.
• Make sure that the product is a sufficient size for the application.
• Make sure that the contact surfaces of the interface are always clean. Make
absolutely sure that no chips of any kind can enter the interface and that the
interface does not fill with cooling emulsion, which is particularly possible with
vertical alignment of the clamping pin axis. The best way to ensure both of these
requirements is to use the SDE protection covers. If the interface should fill with
cooling emulsion, the interface can be dried out in opened state.
• Only use high-quality cooling emulsions with anti-corrosive additives during
processing.
2.6
Work on the product by inadequately qualified personnel can lead to serious injuries and
considerable material damage.
• Order all work to be performed only by appropriately qualified personnel.
• Personnel must have read and understood the complete manual before beginning
any work on the product.
• Observe national accident prevention regulations and the general safety notes.
Basic safety instructions
Spare parts
Ambient conditions and operating
conditions
Personnel qualification
01.00|WDM 80 |en
9
Advertisement
Table of Contents
