Reprocessing The Mask Between Patients; Troubleshooting - ResMed Quattro FX User Manual

WARNING
Do not use aromatic-based solutions or scented oils (eg, eucalyptus or
essential oils), bleach, alcohol or products that smell strongly (eg, citrus)
to clean any of the mask components. Residual vapours from these
solutions can be inhaled if not rinsed thoroughly. They may also damage
the mask, causing cracks.
CAUTION
• If any visible deterioration of a system component is apparent
(cracking, crazing, tears etc), the component should be discarded and
replaced.
• Avoid connecting fl exible PVC products (eg, PVC tubing) directly
to any part of the mask. Flexible PVC contains elements that can
be detrimental to the materials of the mask, and may cause the
components to crack or break.

Reprocessing the mask between patients

This mask should be reprocessed when used between patients. Cleaning,
disinfection and sterilization instructions are available from the ResMed
website, www.resmed.com/masks/sterilisation. If you do not have internet
access, please contact your ResMed representative.

Troubleshooting

Problem/possible cause Solution
Mask is uncomfortable
Headgear straps are too
tight.
Mask could be the wrong
size.
The cushion membrane is designed to infl ate
against your face to provide a comfortable
seal with low headgear tension. Adjust straps
evenly. Ensure that the headgear straps are not
too tight and that the cushion is not crushed or
creased.
Talk to your clinician to have your face size
checked against fi tting template. Note that
sizing across different masks is not always the
same. The cushion is designed to sit mid-bridge.
5