Basic Voice Commands; Get Started - Jeep RENEGADE 2021 Owner's Manual

36 GETTING TO KNOW YOUR VEHICLE
Uconnect 4
Uconnect 4C NAV
If you see the NAV icon on the bottom bar or in
the Apps menu of your 8.4-inch touchscreen,
you have the Uconnect 4C NAV system. If not,
you have a Uconnect 4C with 8.4-inch display
system.
B V C
ASIC OICE OMMANDS
The basic Voice Commands below can be given
at any point while using your Uconnect system.
Push the VR button . After the beep, say:
"Cancel" to stop a current voice session.

"Help" to hear a list of suggested Voice

Commands.
"Repeat" to listen to the system prompts

again.
Notice the visual cues that inform you of your
Voice Recognition system's status.
G S
ET TARTED
The VR button is used to activate /deactivate
your Voice Recognition system.
Helpful hints for using Voice Recognition:
Reduce background noise. Wind noise and

passenger conversations are examples of
noise that may impact recognition.
Speak clearly at a normal pace and volume

while facing straight ahead.
Each time you give a Voice Command, first

push the VR button, wait until after the beep,
then say your Voice Command.
You can interrupt the help message or

system prompts by pushing the VR button
and saying a Voice Command from the
current category.