Parksense Active Park Assist System - If Equipped - Jeep RENEGADE 2021 Owner's Manual

132 STARTING AND OPERATING
WARNING!
Drivers must be careful when backing up

even when using ParkSense. Always check
carefully behind your vehicle, look behind
you, and be sure to check for pedestrians,
animals, other vehicles, obstructions, and
blind spots before backing up. You are
responsible for safety and must continue
to pay attention to your surroundings.
Failure to do so can result in serious injury
or death.
Before using ParkSense, it is strongly

recommended that the ball mount and
hitch ball assembly be disconnected from
the vehicle when the vehicle is not used for
towing. Failure to do so can result in injury
or damage to vehicles or obstacles
because the hitch ball will be much closer
to the obstacle than the rear fascia when
the vehicle sounds the continuous tone.
Also, the sensors could detect the ball
mount and hitch ball assembly, depending
on its size and shape, giving a false indica-
tion that an obstacle is behind the vehicle.
CAUTION!
ParkSense is only a parking aid and it is

unable to recognize every obstacle,
including small obstacles. Parking curbs
might be temporarily detected or not
detected at all. Obstacles located above or
below the sensors will not be detected
when they are in close proximity.
The vehicle must be driven slowly when

using ParkSense in order to be able to stop
in time when an obstacle is detected. It is
recommended that the driver looks over
his/her shoulder when using ParkSense.
PARKSENSE ACTIVE PARK ASSIST SYSTEM
— IF EQUIPPED
The ParkSense Active Park Assist system is
intended to assist the driver during parallel,
perpendicular, and parallel park exit maneuvers
by identifying a proper parking space, providing
audible/visual instructions, and controlling the
steering wheel. The ParkSense Active Park
Assist system is defined as "semi-automatic"
since the driver maintains control of the
accelerator, gear selector and brakes.
Depending on the driver's parking maneuver
selection, the ParkSense Active Park Assist
system is capable of maneuvering a vehicle into
a parallel or a perpendicular parking space on
either side (i.e., driver side or passenger side),
as well as exiting a parallel parking space.
NOTE:
The driver is always responsible for

controlling the vehicle, responsible for any
surrounding objects, and must intervene as
required.
The system is designed to assist the driver

and not to substitute the driver.
During a semi-automatic maneuver, if the

driver touches the steering wheel after being
instructed to remove their hands from the
steering wheel, the system will cancel, and
the driver will be required to manually
complete the parking maneuver.
The system may not work in all conditions

(e.g. environmental conditions such as heavy
rain, snow, etc., or if searching for a parking
space that has surfaces that will absorb the
ultrasonic sensor waves).