Jeep RENEGADE 2021 Owner's Manual page 80

78 GETTING TO KNOW YOUR INSTRUMENT PANEL
Driver Assist — If Equipped
Push and release the up or down
button until the Driver Assist menu title
displayed is highlighted in the instrument
cluster display.
LaneSense — If Equipped
The instrument cluster display displays the
current LaneSense system settings. The
information displayed depends on LaneSense
system status and the conditions that need to
be met.
Fuel Economy
This menu item allows you to view the fuel
economy of the vehicle. The following will
display:
Range (Miles or km)

Current Consumption (mpg or L/100km or

km/l)
Average Consumption (mpg or L/100km or

km/l)
Reset procedure shown at the bottom of the
display.
Trip Info
arrow Push and release the up
button until the Trip menu title is displayed in the
instrument cluster display. Toggle the left
right arrow button to select Trip A or Trip B.
The Trip information will display the following:
Distance – Shows the total distance (mi or

km) traveled for Trip A or Trip B since the last
reset.
Average Fuel Economy – Shows the average

fuel economy (MPG or L/100 km or km/L) of
Trip A or Trip B since the last reset.
Elapsed Time – Shows the total elapsed time

of travel since Trip A or Trip B has been reset.
Hold the OK button to reset feature information.
Stop/Start – If Equipped
Push and release the up
button until the Stop/Start menu title is
displayed in the instrument cluster display.
This menu shows messages related to Stop/
Start. Only one message can be viewed at a
time until the condition is cleared. When the
Stop/Start is engaged (and the engine is off),
the associated hardware telltale is turned on.
Whenever a user pushes the Stop/Start button
on the central stack, a pop up message of the
or down arrow
Stop/Start status will appear on the instrument
cluster display.
or
Audio
Push and release the up
button until the Audio menu title is displayed in
the instrument cluster display.
Stored Messages
Push and release the up
button until the Messages Menu Icon is
highlighted in the instrument cluster display.
This feature shows the number of stored
warning messages. Pushing the left
right
through the stored messages.
Screen Setup
or down arrow
This menu item allows you to change the
position of the information on the display.
or down
or down
arrow button will allow you to scroll
arrow
arrow
or