Jeep RENEGADE 2021 Owner's Manual page 386

384 SERVICING AND MAINTENANCE
3. By pushing the electrical connector tab
remove the electrical connector.
Fog Light Assembly
4. Rotate the bulb counterclockwise, and then
replace the bulb.
5. Insert the new bulb in the socket, making
sure the bulb is locked into place.
6. Reconnect the electrical connector.
7. Reinstall the access door.
LED Front Fog Lamps – If Equipped
For replacement see an authorized dealer.
Front Side Indicators
See below steps to replace:
1. Operating from inside the engine
compartment using a suitable tool release
the retaining clip.
2. Remove lamp assembly by sliding it toward
the outside.
Lamp Assembly
3. Remove the electrical connector by pushing
the tab then disconnect the electrical
connector.
4. Rotate counterclockwise to release the bulb
socket from the lamp assembly, and
remove it.
Bulb Socket
5. Remove the bulb from the socket.
Bulb