Jeep RENEGADE 2021 Owner's Manual page 201

The Phone feature is driven through your
Bluetooth® "Hands-Free Profile" mobile phone.
Uconnect features Bluetooth® technology — the
global standard that enables different electronic
devices to connect to each other without wires or a
docking station. Ensure you phone is turned on with
Bluetooth® active and has been paired to the
Uconnect system. Up to 10 mobile phones or audio
devices are allowed to be linked to the system. Only
one linked (or paired) mobile phone and one audio
device can be used with the system at a time.
Phone Button
The Phone button on your steering wheel is
used to get into the Phone Mode and make
calls, show recent, incoming or outgoing calls,
view phonebook, etc. When you push the button
you will hear a BEEP. The BEEP is your signal to
give a command.
Voice Command Button
The Voice Command button on your steering
wheel is only used for "barge in" and when you are
already in a call or want to make another call.
The button on your steering wheel is also used
to access the Voice Commands for the
Uconnect Voice Command features if your
vehicle is equipped.
Phone Operation
Operation
Voice commands can be used to operate the
Uconnect Phone and to navigate its menu
structure. Voice commands are required after
most Uconnect Phone prompts. There are two
general methods for how Voice Command
works:
1. Say compound commands like "Call John
Smith mobile".
2. Say the individual commands and allow the
system to guide you to complete the task.
You will be prompted for a specific command
and then guided through the available options.
Prior to giving a voice command, one must

wait for the beep, which follows the "Listen"
prompt or another prompt.
For certain operations, compound

commands can be used. For example,
instead of saying "Call" and then "John
Smith" and then "mobile", the following
compound command can be said: "Call John
Smith mobile."
MULTIMEDIA
For each feature explanation in this section,

only the compound command form of the
voice command is given. You can also break
the commands into parts and say each part
of the command when you are asked for it.
For example, you can use the compound
command form voice command "Search for
John Smith," or you can break the
compound command form into two voice
commands: "Search Contacts" and when
asked, "John Smith." Please remember, the
Uconnect Phone works best when you talk in
a normal conversational tone, as if speaking
to someone sitting a few feet/meters away
from you.
Natural Speech
Your Uconnect Phone Voice system uses a
Natural Language Voice Recognition (VR)
engine.
Natural speech allows the user to speak
commands in phrases or complete sentences.
The system filters out certain non-word
utterances and sounds such as "ah" and "eh."
The system handles fill-in words such as "I would
like to".
199
5