Jeep RENEGADE 2021 Owner's Manual page 343

3. Before raising the vehicle, use the wheel
bolt wrench to loosen, but not remove, the
wheel bolts on the wheel with the flat tire.
Turn the wheel bolts counterclockwise one
turn while the wheel is still on the ground.
4. Place the jack underneath the jacking
location that is closest to the flat tire.
Jacking location is indicated by a stamped
arrow on the body. Turn the jack screw
clockwise to firmly engage the jack saddle
with the lift area of the sill flange, centering
the jack saddle inside the cutout in the sill
cladding.
Jacking Locations
Front Lifting Point
Front Jacking Location
IN CASE OF EMERGENCY
Rear Lifting Point
Rear Jacking Location
5. Raise the vehicle just enough to remove the
flat tire.
341
7