Siemens LOGO! Series Manual page 53

The following appears in the display panel
w1
You have now entered the first block. Every block you enter receives a
number, the block number. All you have to do now is wire the inputs of
the block. To do this:
Press the OK button:
The following appears in the display panel
w1
Co
Select the Co list: Press the OK key
The following appears in the display panel
w1
x
The first item in the Co list is the character for indicating that an input is
not used, an "x". Use the
w1
I1
Press the OK key: I1 is connected to the input of the OR block. The cursor
jumps to the next input of the OR block.
LOGO! manual
EWA 4NEB 712 6006-02
B01 Block number
Q1
B01
Q1
B01
Q1
or key to select input I1.
Q1
Programming LOGO!
Your program looks like this
B01
w1
Your program looks like this
B01
w1
Your program looks like this
B01
w1
Q1
Q1
Q1
47