Mounting In Housing Fdch221 - Siemens FDCW241 Technical Manual

Mounting / Installation
5

Mounting in housing FDCH221

5.2 Mounting in housing FDCH221
28 | 62
Building Technologies
Fire Safety
The radio gateway can be installed in a separate housing FDCH221. The housing
protects the radio gateway from dirt and dust.
Figure 6: Installing housing FDCH221
1 Cable entry
2 Cables
3 Screw for radio gateway
Proceed as follows to install the radio gateway in housing FDCH221:
1. Break out the required cable entries (1) on the housing.
2. Install the housing with screws (4) on a level surface.
3. Insert the cables (2). If necessary, fix the cables using M20 x 1.5 cable glands
or use a different cable entry.
4. Remove the housing cover from the radio gateway and dispose of it in an
environmentally-friendly manner. [
5. Install the radio gateway in the housing using the fixing screw (3) provided.
6. Connect [ 29] the radio gateway.
7. Close the housing using the screws (5) provided.
The radio gateway is now installed in housing FDCH221. The radio gateway
indicators can be viewed through the window of the housing.
1 2 3 4
Ø max. 4.8 mm
4 Screws for securing the housing
5 Screws for housing cover
59]
5
A6V10227639_k_en_--
2016-11-28