Siemens FDCW241 Technical Manual page 27

Radio gateway

Hide thumbs Also See for FDCW241:

Table of Contents

Building Technologies

Fire Safety

6. Mount the back box, without the battery pack, on a flat surface using two

screws (Ø max. 4.3 mm) at the mounting points (see 'Master gauge for

recesses [

59]' chapter). One screw at the mounting point is sufficient for

fixing in housing FDCH221.

7. Fasten the cable using a cable tie as strain relief (4).

8. Label the battery pack with the date.

9. Insert the battery pack and check the position of the battery cable. Do not

connect the battery pack until you are ready to commission the radio cell.

The radio gateway is installed.

Table of Contents