Putting The Radio Cell Into Normal Operation - Siemens FDCW241 Technical Manual

Maintenance / troubleshooting
7

Putting the radio cell into normal operation

7.3 Putting the radio cell into normal operation
40 | 62
Building Technologies
Fire Safety
Figure 16: Radio gateway FDCW241
H2 Yellow LED for maintenance mode
S1 Button for maintenance mode
The housing for the radio gateway is open.
The process of logging radio devices on to the radio gateway is complete.
1. Check LED (H2).
In 'maintenance mode', LED (H2) flashes.
2. Press and hold button (S1) for at least 2 seconds.
LED (H2) goes out.
The radio cell is in normal operation.
If necessary, check the station settings.
You will find more information in the 'Changing and expanding the FDnet/C-NET
detector line' chapters of the following documents:
For control panels FC20xx: Document 009052
For control panels FC72x: Document A6V10210416
H2
S1
A6V10227639_k_en_--
2016-11-28